Harvesting wheat silage with the ROC RT 1000 merger – Isʀᴀᴇʟ

Agriculture Machine

The ROC RT 1000 rake is the representation of a ground-breaking collection idea. The RT 1000 picks up the product to then carry it on a belt, in contrast to typical rakes that pull the product across the field to the swath, which is the key distinction between it and conventional options.

This major difference leads to:
Less chipping of hay and more quality;
The tiny stems of alfalfa or clover that support the leaves become incredibly brittle after drying in the sun. The little rods are far more likely to break if the raking is done using conventional rotary rakes, especially in the hours when there is no dew. As a result, leaves and proteins necessary for animal feeding would disappear. In contrast, the ROC system gently deposits the loaded product on the conveyor belt so that it can be carried and unloaded centrally without being harmed. Additionally, multiple studies have demonstrated that the ROC technique allows for the reduction of dirt and stone in the swath, ensuring fᴏᴅᴅer of unmatched quality.

Lower product ʟᴏsses
Traditional rakes during training can lose some of the material when there are ruts or holes. However, with our ground-breaking rake, the product is transported on a belt rather than being pulled into the swath as is typically the case;

Minor impact on regrowth
Some products, like alfalfa, regenerate within 2 to 3 days of being mowed under normal circumstances, with short stems and few leaves. When utilizing giro-rakes in this situation, the short stems may break, delaying the next harvest by several weeks in the case of five mowing operations by the end of the season.

It’s crucial to draw attention to the variations in costs as well as harvest. In fact, a tractor with just 100 horsepower may cut a swath every 10 meters, significantly reducing consumption, especially in the final cuts of fᴏᴅᴅer where less than 2 tons are harvested each hectare. You are not restricted by the breadth of the rake; you can lift the previously cut swath twice, three times, four times, or even eight times without sacrificing the quality of the result, and you can cut a swath every forty meters.

Since it is possible to direct two of the three mats in one direction and the third in the other direction or vice versa, it lends itself Exᴛʀᴇᴍᴇʟʏ well to the formation of windrows put on a surface where the product has already been harvested. This entails operating your forage chopper or baler as efficiently as possible, as in the best cuts of the year, or at the at least lowering the working hours and, as a result, the equipment consumption for forage harvesting. Additionally, the RT 1000 enables the daytime swathing of delicate goods like alfalfa, avoiding labour at night and protecting the product from dew-related moisture.

Let’s see Wheat silage harvesting with ROC RT 1000 merger – Isʀᴀᴇʟ in the ᴀᴡᴇsome video below.

Thank you for visiting our website! We hope you found soᴍᴇᴛʜing that sparked your interest on our website.

Video resource: Alon Joseph

Leave a Reply

Your email address will not be published.