ᴅᴀɴɢᴇʀᴏᴜs Heavy Equipment Dump trucks Unloading Extreme Powerful Oversize load Transportation

Truck

The most effective, dependable, and high-capacity truck unloading capabilities are offered to customers through our truck dump product range. In practically all wood-processing businesses, the bruks truck dump shortens unload cycle times and eases traffic congestion. For many logistics organizations, it is difficult to unload wood chip trailers because much of the equipment is cumbersome and takes up valuable space. Our drive-over truck dumper solves this issue with a cutting-edge, compact design that guarantees vehicles can be emptied securely and quickly.

Bruks’ truck dumper designs have been installed all over the world and have been demonstrated to work well over a long period of time, so little operator interaction is needed to assure safe, effective operation. They can tow loads up to 63.5 metric tons and manage truck and trailer lengths as long as 26 meters. Platforms can be made to fit a range of truck lengths and weights, just like our entire line of truck dumpers.

Driving into the dumper, over the pit bridge, and straight onto the tipping platform, the driver stops just in front of the backstop area. The driver backs up until the Bᴜᴍᴘer touches the backstop after the backstop swings into place. The front safety chain is then secured when the cab has been turned off. The driver then proceeds to the control box, which is off the main platform, and holds the up button. When the trailer is empty, the driver presses the down button, which causes the platform to fall. The pit bridge rises out of the way to reveal the receiving hopper’s entrance. The shackles can then be loosened, the back doors of the trailer ᴄʟᴏsᴇd, and the truck driven off the platform.

Due to the fact that trucks and trailers do not need to be reversed into position, this operation is slightly quicker than a back-on approach and typically takes eight to nine minutes between trucks. As a result, more trucks may be handled each day because it saves time, eases traffic, and increases the truck dumper’s processing capacity. In roughly four minutes, the platform elevates to a maximum angle of 63 degrees for an over-truck dumper.

A specially created receiving hopper is included with the drive-over truck dump, ensuring a flawless technological integration. Together, they produce the most effective, optimized, and secure ᴍᴇᴛʜod of unloading wood chips. Usually, the load is discharged from the chain bottom hopper onto a receiving belt conveyor, which moves the material to the following stage of processing. The hopper is completely covered and contained because it is below the pit bridge and platform, practically underground in a sealed concrete bunker. This limits material ʟᴏsses while protecting the environment from dust emissions. If more air collection is required, it can be placed ᴄʟᴏsᴇ to the tipping area.

Let’s see ᴅᴀɴɢᴇʀᴏᴜs heavy equipment dump trucks unloading extreme powerful oversize load transportation in the ᴀᴡᴇsome video below.

Thank you for visiting our website! We hope you found soᴍᴇᴛʜing that sparked interest on our website.


Video resource: TTH – Machine

Leave a Reply

Your email address will not be published.